WOOD REPLACEMENT PARTS


FOR VINTAGE BOSTON WHALER BOATS

 
Fire Extinguisher Box for Boston Whaler

The Fire Extinguisher Pocket Box has a teak frame and a teak marine plywood box that is nailed and epoxied. These are exact duplicates of the boxes used in the classic 1980's boats. The outside frame measures 18 5/8" x 7 9/16", the box is 6 1/16" wide x 17 5/8" tall, and 5" deep, outside dimensions. Mounting holes are pre-drilled, and stainless steel screws are included.

"As a devoted restorer of Boston Whalers I have experienced the frustration of trying to find quality wood parts to replace the worn, broken, or missing ones. With more than a little experience in the woodworking department, I decided to make the parts for my own boat. Using the finest Teak and Philippine Mahogany woods as in the original Whalers, I have made faithful reproductions to the exact dimensions of the originals. Now I am offering them to you. I guarantee you will be happy with these replacement parts."

Walter Reynolds

P.S.  If you are looking for a part that you don’t see here give me a call or e-mail as I may be able to make one up for you.  If you have the old part for me to copy, all the better. 

OUTRAGE COOLER CLEATS 
$100/pair, UNFINISHED 
CLICK FOR MORE PHOTOSOUTRAGE_COOLER_CLEATS.htmlOUTRAGE_COOLER_CLEATS.htmlshapeimage_2_link_0

The Outrage Cooler Cleats are made from FEQ (First European Quality) 5/4" teak. They are 15" long, and about 4 1/16" at the widest. These are exact duplicates of the originals.

MONTAUK and other 17' Models, COOLER CLEATS 
$100/pair, UNFINISHED
CLICK FOR MORE PHOTOSMONTAUK_COOLER_CLEATS.htmlMONTAUK_COOLER_CLEATS.htmlshapeimage_3_link_0
TEAK FIRE EXTINGUISHER BOX 
$125, UNFINISHED
CLICK FOR MORE PHOTOS FIRE_EXTINGUISHER_BOX.htmlFIRE_EXTINGUISHER_BOX.htmlshapeimage_5_link_0

The Montauk Cooler Cleats are made from 5/4” Philippine Mahogany (shown left).  They are 17" long, and 4" at the widest. Or now available in FEQ teak (shown below right)

for $135./pair, unfinished.

OUTRAGE UNDER-GUNWALE
ROD RACK/HOLDERS
 $150/Set of 4, UNFINISHED
CLICK FOR MORE PHOTOS 
OUTRAGE_ROD_RACKS.htmlOUTRAGE_ROD_RACKS.htmlshapeimage_7_link_0

The  two or three-hook Outrage Rod Rack/Holders are made from 3/4" Philippine Mahogany marine plywood (13 ply, for strength and durability). They are duplicates of the originals with the hook pattern being a direct copy. They measure 4" x 15" for Outrage 18's (also available in a two-hook version, shown below), and 4" x 17 3/16" for 20's & 22’s. All edges are eased, ready for finish. Please check your dimensions before ordering.

 Outrage Sump Cover Boston Whalter
CLICK HERE FOR SUMP COVERSSUMP_COVERS.html

BLACK DUCK GALLERY


25 BROAD STREET

WESTERLY, RI 02891

401.348.6500


blackduckgallery@verizon.net


©2012 Black Duck Gallery

PAYMENT OPTIONS:


We accept VISA, Mastercard, American Express, Discover, Cashiers Check, Money Order, or Paypal

Outrage Rod Racks Boston Whaler
TEAK BOW LOCKER COVERS, 
SMALL - $375, UNFINISHED
LARGE  - $400, UNFINISHED
CLICK FOR MORE PHOTOSBOW_LOCKER_COVERS.htmlBOW_LOCKER_COVERS.htmlshapeimage_10_link_0

The Stern Light Holder Blocks are made from 3/4” teak, 2 1/2" square. Available with, or without 3/4" or 1 1/4" Beckson clip.  $20 for the block only.  $25 with the clip installed.

TEAK BOW LOCKER COVERS, 
SMALL - $375, UNFINISHED
LARGE  - $400, UNFINISHED
CLICK FOR MORE PHOTOSBOW_LOCKER_COVERS.htmlBOW_LOCKER_COVERS.htmlshapeimage_11_link_0
The Bow Locker Covers, made from 4/4 FEQ teak, are available in 2 sizes. The large cover is a 6-board style.  The small cover is available in either a 5- or 6-board style.  These covers fit Montauks, Sports, Newports, etc.  The approximate dimensions are shown on the MORE PHOTOS page.  Please check your dimensions before ordering. CLICK HERE

PAGE 1 -

PAGE  2WOODPARTS_2.html
FOR MORE PARTS SEE PAGE 2WOODPARTS_2.html

PAGE 1 -

PAGE  2WOODPARTS_2.html

OUTRAGE UNDER-GUNWALE

ROD RACK/HOLDERS

$175/Set of 4, UNFINISHED


Fitting some early model Outrages, these Rod Rack/Holders are made from 3/4" Philippine Mahogany marine plywood (13 ply, for strength and durability). They are duplicates of the originals with the hook pattern being a direct copy.  All edges are eased, ready for finish.

FOR MORE PARTS SEE PAGE 2

NEW!! TEAK CONSOLE & RPS RISERS

PAGE  2
Thanks to the design expertise and generosity of longtime Boston Whaler enthusiast, Lawrence Goltz, we are happy to offer these 100% FEQ (Finest European Quality) teak risers. All of you who find the console and/or Reverse Pilot Seat on your favorite Boston Whaler to be too low will find these”Goltz” Risers a welcome solution to the problem.  Available in 4” or 6” heights and custom made for your boat. 

4” Console or RPS Risers $240/pr
6” Console or RPS Risers $290/pr

CLICK FOR MORE PHOTOSRISERS.htmlRISERS.htmlshapeimage_18_link_0

TO ORDER CALL 401-348-6500

NEW!! BATTERY PLATFORM IN SUMP

ANOTHER NEW DESIGN BY LAWRENCE GOLTZ:

Designed for the 21’ Outrage (Early Banana Style) this piece is a nice addition at the stern, made of 100% FEQ (Finest European Quality) teak.

$250., UNFINISHED

CLICK FOR MORE PHOTOS21_OUTRAGE_PLATFORM.html21_OUTRAGE_PLATFORM.htmlshapeimage_20_link_0
Outrage Cooler Cleats Boston Whaler
Montauk Cooler Cleats Boston Whaler

NEW!!   As taken from a 1989 Outrage, this version with thinner hooks is now also available $150/Set of 4